Ozaki, S., et al., Granular flow experiment using artificial gravity generator at International Space Station, npj Microgravity, Vol.9, Number 61, (2023).


Yutaro Watanabe, Shingo Nakano, Hirotaka Suzuki, Shingo Ozaki,Numerical analysis of wheel locomotion on soft soil using the extended terramechanics model based on cellular automata,Journal of Terramechanics, Volume 109, Pages 9-20, (2023).


Mostafizur Rahman, Taiyo Maeda, Toshio Osada, Shingo Ozaki,Method of Determining Kinetic Parameters of Strength Recovery in Self-Healing Ceramic Composites,Materials, 16(11), 4079, (2023).



Hirotaka Suzuki, Hiroki Kawakami, Taizo Kobayashi, Shingo Ozaki: Extended terramechanics model for machine-soil interaction: Representation of change in the ground shape and property via cellular automata,Soil and Tillage Research, Volume 226, 2023.


Chihiro Ito, Toshio Osada, Shingo Ozaki: Finite element analysis of fracture behavior in ceramics: Competition between artificial notch and internal defects under three-point bending,Ceramics International, Volume 48, pp.36460-36468, 2022.


Ozaki S, Yamagata K, Ito C, Kohata T, Osada T., Finite element analysis of fracture behavior in ceramics: Prediction of strength distribution using microstructural features. J Am Ceram Soc.2021;1-14.
Shingo Ozaki, Joji Yamamoto, Naoki Kanda, Toshio Osada,Kinetics-based constitutive model for self-healing ceramics and its application to finite element analysis of Alumina/SiC composites,Open Ceramics,Volume 6, 2021, 100135,


Suzuki, S., Watanabe, Y., Kobayashi, T., Karl I., Ozaki, S.: Terramechanics-based investigation of grouser shape for rigid wheels: Comparison between rectangular and trapezoidal grousers, Cogent Engineering, No.1846254, pp.1-19, 2020
尾崎伸吾:セラミックスの破壊統計のためのバーチャルテスト技術,-セッコウ・石灰・セメント・地球環境の科学-,Journal of the Society of Inorganic Materials, Japan, Vol.27, No.409, pp.416-420, 2020.(解説記事)
Osada,T., Watabe,A., Yamamoto,J., Johannes C,B., Cees Kwakernaak., Ozaki, S.: Full strength and toughness recovery after repeated cracking and healing in bone-like high temperature ceramics. scientific reports, 10 ,No.18990, 2020
Ozaki, S., Nakamura, M., Osada, T.: Finite element analysis of the fracture statistics of self-healing ceramics. Science and Technology of Advanced Materials, Vol.21, pp.609-625, 2020.
Osada, T., Hara, T., Mitome, M., Ozaki, S., Abe, T., Kamoda, K., Ohmura, T.: Self-healing by design: universal kinetic model of strength recovery in self-healing ceramics.Science and Technology of Advanced Materials,Vol.21,pp.593-608,2020
Ozaki, S., Mieda, K., Maegawa, S., Nakano, K.: Meso-macro coupled analysis of pressure-dependent friction of rubber. Frontiers in Mechanical Engineering, Vol.6, Article 24, pp.1-12,May 2020.
Suzuki, H., Ozaki, S.: Multi-stage terramechanics simulation: Seamless analyses between formation of wind ripple pattern and wheel locomotion. Cogent Engineering, No.1758289, pp.1-22, May 2020.


Ozaki, S., Matsuura, T., Maegawa, S., Rate-, state-, and pressure-dependent friction model based on the elastoplastic theory. Friction, pp.1-16, 2020.
Goto, K., Hirata, T., Higuchi, T., Fuchiwaki, I., Ozaki, S., Nakao, W., Deformation mechanism of capsule-type hydrogen-strage-alloy actuator. International Journal of Hydrogen Energy, Vol.44, pp.16877-16886, 2019.
Takeo, K., Aoki, Y., Osada, T., Nakao, W., Ozaki, S., Finite element analysis of the size effect on ceramic strength. Materials, Vol.12, No.18, pp.885, 2019.
Suzuki, S., Katsushima, K., Ozaki, S., Study on applicability of RFT to traveling anaysis of wheel with grousers: Comparison with DEM anaysis as a virtual test. Journal of Terramechanics, Vol.83, pp.15-24, 2019.
Nakao, W., Hayakawa, T.,, Yanaseko, T., Ozaki, S., Advanced fiber reinforced self-healing ceramics for middle range temperaturer. Key Engineering Materials, Vol.810, pp.119-124, 2019.
尾崎伸吾:特別解説 有限要素法によるセラミックス強度のばらつきの評価.耐火物技術協会,第71巻12号,pp.502-508,2019.


Yoshinada et al., Dual-Arm construction robot with remote-control function, Disaster Robotics, Springer, pp.195-264, 2019.
Kanehiro, F., Nakaoka, S., Sugihara, T., Wakisaka, N., Ishigami, G., Ozaki, S., Tadokoro, S., Simulator for disaster response robotics, Disaster Robotics, Springer, pp.453-477, 2019.
尾崎伸吾:自己治癒材料の開発に不可欠なシミュレーション技術.日経BP スマートマテリアル総覧,第2章 分野別最新動向 材料動向編,pp.11-18,2018.
Ozaki, S., Aoki, Y., Osada, T., Takeo, K., Nakao, W.: Finite element analysis of fracture statistics of ceramics: Effects of grain size and pore size distributions. Journal of the American Ceramic Society, Vol.101, pp.3191-3204, 2018.
Ozaki, S., Mieda, K., Matsuura, T., Maegawa, S.: Simple prediction method for rubber adhesive friction by the combining friction test and FE analysis. Lubricants, Vol.6(2), 38, 2018.
尾崎伸吾,数値解析と表面分析によるトライボロジーの解明と制御,佐々木信也 監修,テクノシステム,第6章第3節


Nakamura, M., Takeo, K., Osada, T., Ozaki, S.: Finite element analysis ofself-healing and damage processes in Alumina/SiC composite ceramics. Technologies, Vol.5(3) 40, 2017.
Goto, K., Ozaki, S., Nakao, W.: Effect of diffusion coefficient variation on interrelation between hydrogen diffusion and induced internal stress in dydrogen storage alloys. Journal of Alloy and Compounds, Vol.691, pp.705-712, 2017.
Oba, Y., Takeo, K., Nakao, W., Ozaki, S.: Numerical study on crack bifurcation of self-healing fiber-reinforced ceramic matrix composite. Mechanical Engineering Journal, Vol.4(5), 16-00705, 2017.


Ozaki, S., Osada, T., Nakao, W.: Finite element analysis of the damage and healing behavior of self-healing ceramic materialsl. International Journal of Solids and Structures, Vol.100, pp.307-318, 2016.
長田俊郎,尾崎伸吾,中尾航:自己治癒セラミックスにおける速度論モデルの最新動向.Journal of the Society of Inorganic Materials, Japan,第23号,pp.460-465,2016.
Ozaki, S., Kondo, W.: Finite element analysis of tire traveling performance using anisotropic frictional interaction model. Journal of Terramechanics, Vol.64, pp.1-9, 2016.


Ozaki, S., Hinata, K., Cenatore, C., Iagnemma, K.: Finite element analysis of periodic ripple formation under rigid wheels. Journal of Terramechanics, Vol.61, pp.11-22, 2015.
Ozaki, S., Han, K.,.: Meso-macro decoupling analysis of stick-slip transition. International Tribology Conference, 20pD-02, 2015.
Nihira, T., Manabe, K., Tadokoro, C., Ozaki, S., Nakano, K.: Complex impedance measurement applied to short-time contact between colliding steel surfaces. Tribology Letters, Vol.57, pp.1-11, 2015.
Ozaki, S., Horie, Y., Hinata, K., Osada, T., Nakao, W.: Finite element analysis of damage -healing behavior in self-healing ceramic materials. Coupled Problem, Ebook, pp.849-858, 2015.
Nakao, W., Ozaki, S., Osada, T., Nanko M.: Material design of self-healing ceramics. IUMRS-ICAM, 2015.
Nakao, W., Ozaki, S., Osada, T., Nanko M.: Application road map of self-healing ceramics. International Conference on Self-healing Materials, 2015.


Ozaki, S., Inanobe, C., Nakano, K.: Finite element analysis of precursors to macroscopic stick-slip motion in elastic materials: analysis of friction test as a boundary value problem. Tribology Letters, Vol.55, pp.151-163, 2014.
Morosawa, S., Nishimoto, S., Ozaki, S., Yamanashi, Y.: Frictional shear test of granular media in pseudo low gravity field using magnetic devise. Proceedings of the 18th International Conference of the ISTVS, No.54, pp.1-6, 2014.
Kobayashi, T., Ishigami, G., Ozaki, S., Sutoh, M.: Current status and prospects of terramechanics-based simulation techniques for planetary rover. Robotics and Automation in Space i-SAIRAS, pp.1-7, 2014.


津久井 祐徳,尾崎伸吾, 眞鍋和幹,田所千治,中野 健:球衝突による潤滑平面の塑性圧痕形成プロセスのALE有限要素解析.日本機械学会論文集A編,79巻,pp.477-488, 2013年.
Ozaki, S., Ito, C., Hashiguchi, K.: Experimental verification of rate-dependent elastoplastic analogy friction model and its application to FE analysis. Tribology International, Vol.64, pp.164-177, 2013. DOI: 10.1016/j.triboint.2013.03.016


Ozaki, S., Tsuda, K., Tominaga, J.: Analyses of static and dynamic behavior of coned disk springs: Effects of friction boundaries. Thin-Walled Structures, Vol.59, pp.132-143, 2012.

This article is fuatured online on Advances in Engineering.

Ozaki, S., Hikida, K., Hashiguchi, K.: Elastoplastic formulation for friction with orthotropic anisotropy and rotational hardening. International Journal of Solids and Structures, Vol.29, pp.648-657, 2012
尾崎伸吾, 疋田和希,橋口公一:接触面の周期的なテクスチャー構造を考慮した異方性摩擦モデル.テラメカニックス,第32号,pp.3-8, 2012.


中野 健,尾崎伸吾:潤滑面の衝突現象の極限に挑む,特集・境界潤滑の極限に挑む.トライボロジスト,第56巻,9号,pp.537-542,2011年.(解説記事)
Ozaki, S.: Finite element analysis of rate- and state-dependent frictional contact behavior, Key Engineering Materials, Vols.462-463, pp.547-552, 2011.


Suzuki, S., Watanabe, Y., Kobayashi, T., Karl I., Ozaki, S.: Terramechanics-based investigation of grouser shape for rigid wheels: Comparison between rectangular and trapezoidal grousers, Cogent Engineering, No.1846254, pp.1-19, 2020
尾崎伸吾,津田 兼,田島典拓,冨永 潤:皿ばねの変形挙動に及ぼす端部摩擦の影響.自動車技術会論文集,第41巻,6号,pp.1205-1210,2010年.
Ozaki, S., Hashiguchi, K.: Numerical analysis of stick-slip instability by a rate-dependent elastoplastic formulation for friction, Tribology International, Vol.43, pp.2120-2133, 2010.
Chen, D.H., Ozaki, S.: Axial collapse behavior of plates, Thin-Walled Structures,Vol.48, Issue 2, pp.77-88, 2010.


Chen, D.H., Ozaki, S.: Numerical study of axially crushed cylindrical tubes with corrugated surfaces, Thin-Walled Structures,Vol.47, No.11, pp.1387-1396, 2009.
Chen, D.H., Ozaki, S.: Circumferential strain concentration in axial crushing of cylindrical and square tubes with corrugated surfaces, Thin-Walled Structures,Vol.47, No.5, pp.547-554, 2009.
Chen, D.H., Ozaki, S.: Stress concentration due to defects in a honeycomb structure, Composite Structures, Vol.89, No.1, pp.52-59, 2009.
Chen, D.H., Ozaki, S.: Analysis of in-plane elastic modulus for a hexagonal honeycomb core: Effect of core height and proposed analytical method, Composite Structures, Vol.88, No.1, pp.17-25, 2009.
Chen, D.H., Yoshida, S., Ozaki, S.: Deformation behavior for axial crushing of three-fold point corner, Journal of Computational Science and Technology , Vol. 3 , No. 2, pp. 426-436, 2009.


Chen, D.H., Ozaki, S.: Investigation of Failure Criteria for a Sharp Notch, International Journal of Fracture, Vol.152, No.2, pp.63-74, 2008.
Chen, D.H., Uchisawa, A., Ozaki, S.: Study on a dent phenomena of spherical shells, Journal of Solid Mechanics and Materials Engineering, Vol.2, No.10, 2008, pp.1265-1274.
Hashiguchi, K., Ozaki, S.: Anisotropic constitutive equation for friction with transition from static to kinetic friction and vice versa, Journal of Applied Mechanics, JSCE, Vol. 11, pp.271-282, 2008.
Masuda, K., Chen, D.H., Ozaki, S., Ushijima, K.: Prediction of maximum moment of circular tubes subjected to pure bending in consideration of the length effect, International Journal of Modern Physics B, Vol.22, No.9-11, pp.1724-1729.
尾崎伸吾,陳 玳行:加工硬化を考慮した板の軸崩壊応力の簡易予測法,設計工学,43巻,9号,pp.36-43,2008年.
Hashiguchi, K., Ozaki, S.: Constitutive equation for friction with transition from static to kinetic friction and recovery of static friction, International Journal of Plasticity, Vol.24, pp.2102-2124, 2008.
Ozaki, S., Hashiguchi, K., Chen, DH.: Analysis of stick-slip motion by the rate-dependent friction model, Advanced Materials Research (AMR), 2008, Vols.33-37, pp.867-874.
尾崎伸吾,陳 玳行,篠原雅人:軸圧縮を受ける板の崩壊挙動に関する数値解析的検討,日本機械学会論文集A編,第74巻,pp.45-52,2008年

2007 以前

Chen, D.H., Ozaki, S.: General solution of stresses due to an adhesion crack for T-shaped junction of two plates, International Journal of Fracture, Vol.148, pp.195-203, 2007.
尾崎伸吾,橋口公一,陳 玳行:時間依存性摩擦構成式を用いたスティック・スリップ運動の安定性に関する検討,応用力学論文集(土木学会),Vol.10,pp.445-455,2007年.
陳 玳行,尾崎伸吾:有限高さを持つ六角形ハニカムコア材の面内等価弾性定数,応用力学論文集(土木学会),Vol.10,pp.425-436,2007年.
Hashiguchi, K., Ozaki, S.: Constitutive equation for friction with rotational and orthotropic anisotropy, Journal of Applied Mechanics, JSCE, Vol. 10, pp.383-389, 2007.
Ozaki, S., Hashiguchi, K., Okayasu, T., Chen, D.H.: Finite element analysis of a wheel-soil interaction phenomenon by unconventional elastoplastic and friction models, Japanese Society of Automobile Engineering, Vol.38, No.4, 20074454, pp.9-16, 2007.
Ozaki, S., Hashiguchi, K., Okayasu, T., Chen, D.H.: Finite element analysis of particle assembly-water coupled frictional contact problem, Computer Modeling in Engineering & Sciences, Vol.18, No.2, pp.101-120, 2007.
橋口公一,尾崎伸吾:静止・動摩擦の遷移過程を考慮した摩擦構成モデル (速度依存性下負荷面摩擦モデル),日本機械学会論文集A編,第73巻,pp.411-418,2007年.
尾崎伸吾,岡安崇史,橋口公一, 陳 玳行:すべり摩擦現象を考慮した圧密試験の土-水連性有限要素解析,応用力学論文集(土木学会),第8巻,pp.349-359.2005年.
Hashiguchi, K., Ozaki, S., Okayasu, T.: Unconventional friction theory based on the subloading surface concept, International Journal of Solids and Structures, Vol.42, pp.1271-1847, 2005.


第62回理論応用力学講演会 優秀講演賞 2012年度
自動車技術会 大学院研究奨励賞 2011年度 (津田 兼 君)
日本機械学会 機素潤滑設計部門 一般表彰(優秀講演) 2010年度
日本設計工学会 論文賞 2008年度
日本機械学会 材料力学部門 優秀講演表彰 2006年度
地盤工学会 優秀発表者賞 2005年度